User Manual Q&AAnswer
Feb 01, 2025 - 02:14 AM
To attach and remove accessories on the Milwaukee M18 Fuel Anvil Controlled Torque Impact Wrench, follow these steps:
1. For 1/2" Pin Detent: Use only the appropriate size Square Drive Sockets. To attach a socket, align the hole in the accessory with the detent pin on the anvil. Hold the detent pin in while pushing the socket onto the anvil. The detent pin will snap into place in the hole to secure the socket. To remove the socket, insert a nail or other thin object into the hole in the accessory and press in the detent pin. Pull the accessory off the anvil.
2. For 3/8" and 1/2" Friction Ring: Use only the appropriate size Square Drive Sockets. To attach a socket, align the accessory with the anvil and push it firmly over the retaining ring. To remove the accessory, pull the accessory off the anvil.
It is important to only use accessories specifically recommended for this tool, as others may be hazardous.
Add New Comment