User Manual Q&AAnswer
Feb 01, 2025 - 02:09 AM
To activate the OOWOW service on the KHADAS Edge2 Single-Board Computer, follow these steps:
1. Make sure your device storage is empty. If there is any existing data, back it up or remove it.
2. Hold the "Function" button on the Edge2 and press the "Reset" button. This will activate the OOWOW service.
3. Once OOWOW starts, you can control the Edge2 either with a display and keyboard connected directly to the board or remotely over WiFi.
4. If you want to activate the Hotspot feature, press the "Function" button after OOWOW starts.
5. The network name for the Edge2 Hotspot will be "edge2-xxxxx" where "xxxxx" represents the last 5 digits of the serial number of your device.
For more detailed information and troubleshooting, you can refer to the official KHADAS Edge2 user guide at https://docs.khadas.com/oowow.
If you encounter any technical issues or have further questions, you can seek help at the KHADAS community forum at forum.khadas.com.
Source: To activate the OOWOW service on the KHADAS Edge2 Single-Board Computer, follow these steps: 1. Make sure your device storage is empty. If there is any existing data, back it up or remove it. 2. Hold the "Function" button on the Edge2 and press the "Reset" button. This will activate the OOWOW serv
Add New Comment