How do I install the LOWE S 49824190 Light Duty Shelf Bracket? (Lowe's 49824190 Light Duty Shelf Bracket Instruction Manual)

Answer

manuals.plus

Feb 01, 2025 - 02:07 AM


To install the LOWE S 49824190 Light Duty Shelf Bracket, please follow the steps below:

1. Start by gathering the necessary tools and materials: a drill, a drill bit suitable for the anchor size, a screwdriver, a level, and a pencil.

2. Determine the desired height and location for the shelf bracket. Mark the position on the wall using a pencil.

3. Use the provided anchor screws and a drill bit to create holes in the marked positions on the wall. Ensure that the holes are deep enough to accommodate the anchor size.

4. Insert the anchors into the holes. Tap them lightly with a hammer if needed to secure them in place.

5. Align the shelf bracket with the anchors and insert the provided screws through the bracket holes into the anchors.

6. Use a screwdriver to tighten the screws until the shelf bracket is securely attached to the wall.

7. Repeat the above steps for the remaining shelf brackets, ensuring they are evenly spaced and aligned.

8. Once all the shelf brackets are installed, place the shelf on top of the brackets and ensure it is level. Adjust the position if necessary.

Finish: The LOWE S 49824190 Light Duty Shelf Bracket comes with a finish that is ready to use. No additional finishing steps are required.

Please note that the above instructions are a general guide. For more specific and detailed instructions, it is recommended to refer to the instruction manual provided with the product.