How do I connect the Applied Motion Products STF-R-C-D-IP Stepper Drive to my PC for configuration? (Applied Motion STF-R-C-D-IP Stepper Drives User Guide)

Answer

manuals.plus

Feb 01, 2025 - 01:58 AM

To connect the Applied Motion Products STF-R-C-D-IP Stepper Drive to your PC for configuration, follow these steps:

1. Install the STF Configurator software on your PC. You can download it from the Applied Motion Products website.

2. Connect the drive to your PC's communication port using a programming cable. For RS-485 and CANopen models, use the Applied Motion 8500-003 USB-serial adapter with xxxx terminal connectors. For Ethernet models, use an Ethernet cable (CAT5e or CAT6).

3. Run the STF Configurator software on your PC and select the appropriate COM port in the software.

4. Apply power to the drive.

5. The software will recognize the drive and display the model and firmware version.

6. For Ethernet drives, enter your drive's IP address and ping to ensure a response before clicking on "connect".

7. Click "Yes" to upload the drive configuration.

8. Configure your stepper motor by selecting it from the drop-down list. If you are using an Applied Motion Products motor, you can choose from the provided options.

9. Configure the control mode settings, I/O functions, and other parameters as needed.

10. When you are ready to test your configuration, click "Download All to Drive".

By following these steps, you will be able to connect and configure the Applied Motion Products STF-R-C-D-IP Stepper Drive using the STF Configurator software on your PC. For more detailed instructions and illustrations, please refer to the user guide provided by Applied Motion Products.