User Manual Q&AAnswer
Feb 01, 2025 - 01:48 AM
To charge your device using the ANKER PowerHouse II 700 Portable Power Station, follow these steps:
1. Connect your device to either the USB-A or USB-C output port on the PowerHouse II 700.
2. Once your device is connected, the corresponding LED indicator will light up.
3. The USB-A and USB-C ports support plug-and-charge, meaning they will automatically turn on when a device is connected and turn off when devices are unplugged.
4. It is recommended to turn off the control buttons after using to avoid draining power, even if no devices are being charged.
5. Please note that the maximum power output of the AC port is 500W. If you use the AC port for devices greater than 500W, the PowerHouse II 700 will automatically turn off.
6. When the PowerHouse II 700 has only 1% battery remaining, the Power Level and Percentage of Capacity Left will flicker to remind you to recharge the PowerHouse II 700.
For more detailed information and instructions, please refer to the ANKER PowerHouse II 700 Portable Power Station User Manual.
Add New Comment