User Manual Q&AAnswer
Feb 01, 2025 - 01:39 AM
To install the GIGABYTE RTX 3080 Graphics Card, please follow these steps:
1. Make sure your computer is turned off and the power cable is unplugged.
2. Remove the chassis cover of your computer and locate the PCI Express x16 or AGP slot. If necessary, remove the bracket(s) from the back of the chassis.
3. Insert the graphics card into the slot until it is firmly in place. If required, plug in the external power cord.
4. xxxx in the bracket of the card to the chassis and close the chassis cover.
5. Connect the appropriate cable (HDMI, DVI, D-sub, Display Port) to the graphics card and your display.
6. Reconnect the power cable.
For more detailed information and illustrations, please refer to the GIGABYTE RTX 3080 Graphics Cards User Guide.
Note: It is important not to remove any labels on the graphics card as doing so may void the warranty. Additionally, please download the necessary drivers and utilities from the provided link (http://download.gigabyte.us/FileList/...) for software installation.
Please refer to the GIGABYTE website (https://www.gigabyte.com) for further information about their products.
Disclaimer: The information provided here is based on the GIGABYTE RTX 3080 Graphics Cards User Guide. Please consult the official manual or contact GIGABYTE support for any specific queries or concerns.
Add New Comment