User Manual Q&AAnswer
Feb 01, 2025 - 01:38 AM
To enter the advanced configuration mode on the Empress Effects ParaEQ MKII, follow these steps:
1. Unplug the power from the pedal.
2. Plug the power back in while holding down both the boost and bypass stomp switches.
3. The LEDs on the pedal should flash momentarily to confirm that you are in the advanced configuration mode.
Once in the advanced configuration mode, you can modify the bypass and boost states of the pedal. To toggle between true bypass and buffered bypass, use the bypass stomp switch. The bypass LED will indicate which mode you are in:
- Bypass LED off = true bypass (default)
- Bypass LED on = buffered bypass
To toggle between normal bypass mode and independent bypass mode, use the boost stomp switch. With independent mode, you can apply boost without engaging the equalization. This is similar to having a separate EQ and boost pedal, each with its own bypass switch. The boost LED will indicate the mode you are in:
- Boost LED off = normal (default)
- Boost LED on = independent
To exit the advanced configuration mode, hold down both the tap and bypass stomp switches. The bypass LEDs will blink momentarily to confirm that the ParaEQ MKII has exited the advanced configuration mode.
Please refer to the user manual for more information and detailed instructions on using the advanced configuration mode of the Empress Effects ParaEQ MKII guitar pedal.
Add New Comment