User Manual Q&AAnswer
Feb 01, 2025 - 01:34 AM
To install the mettatec GNSS X5 PPK Module on your DJI Phantom 4 Pro drone, please follow these steps:
1. Attach the module into the drone's left side leg.
2. Insert a MicroSD memory card into the GNSS X5 Module.
3. Plug the Micro-USB cable into the USB slot of the Phantom 4 Pro drone.
4. Carefully insert the Trigger Sensor under the motor of the drone's left front arm.
5. Install the GNSS Antenna on top of the antenna mount by screwing it to the short connector of the cable provided.
- Make sure to unscrew the supplied fixing nut and save it, in case there is one.
6. Firmly attach the Antenna Mount to the top of the drone using the 3M Velcro provided.
- The correct installation position of the antenna mount is just above the location of the drone camera.
- Validate that the propellers of the drone do not touch the support.
7. Connect the antenna cable to the X5 GNSS module.
- Be careful not to block the view of the drone's anti-collision system.
Please refer to the user guide for visual illustrations and additional information on the installation process.
Add New Comment