User Manual Q&AAnswer
Feb 01, 2025 - 01:17 AM
To assemble and set up the ARDESTO IHS-1650, IHS-2200, or IHS-2800 Infrared Heater, please follow the instructions below:
1. Open the packaging box and remove the heater, safety bag, and foams from the heater.
2. Move the legs installed on the product outward and take them out of their tabs.
3. Rotate the legs and fix them to the leg inner on the heater with the help of a screwdriver.
4. Turn the device upside down and place it on its legs. The device is now ready for use.
Please refer to the provided images in the manual (Figure 1 to Figure 6) for a visual representation of the assembly process.
Note: Make sure that no other high-power electrical appliances are connected to the outlet to which the heater is connected. Also, ensure that the device is in a vertical position and the on/off switches on the control panel are in the ON position.
For further information and detailed instructions on operating, maintenance, and troubleshooting of the ARDESTO IHS-1650, IHS-2200, or IHS-2800 Infrared Heater, please refer to the complete instruction manual provided with the product.
Add New Comment