User Manual Q&AAnswer
Feb 01, 2025 - 01:13 AM
To connect the front I/O cables of the AeroCool G5905 Delta RGB Mid Tower Case, please follow these steps:
1. Refer to your motherboard's manual to identify the corresponding connectors for the front I/O cables. The connectors are typically labeled and located near the bottom-right corner of the motherboard.
2. Locate the front I/O connectors on the AeroCool G5905 Delta RGB Mid Tower Case. These connectors are usually labeled and can be found on the front panel of the case.
3. Match the corresponding connectors on the motherboard with the front I/O connectors on the case. The connectors are color-coded and labeled for easy identification.
4. Connect the individual cables from the front I/O panel to their respective connectors on the motherboard. The cables may include USB ports, audio jacks, power/reset buttons, and LED indicators.
5. Ensure that the connections are secure by firmly pushing the connectors into their respective slots. Take care not to force the connectors, as they should fit easily if aligned correctly.
6. Once all the front I/O cables are connected, you can proceed with the installation of other components, such as the motherboard, PSU, add-on card, HDD, SSD, fans, and radiator, as outlined in the "How to Install Guide" provided with the case.
For further assistance or specific instructions, it is recommended to consult the user manual of your motherboard and the AeroCool G5905 Delta RGB Mid Tower Case.
Add New Comment