User Manual Q&AAnswer
Feb 01, 2025 - 01:06 AM
To change the units of measurement on the INFICON 710-202-G1 Pilot Plus Vacuum Gauge, follow these steps:
1. Press and hold the power button for 3 seconds during power-up.
2. The indicator for the active units will start flashing.
3. Briefly press the power button again to cycle through the available units (Torr, microns, mbar, or Pascal).
4. Once you have selected the desired units, press and hold the power button for 1 second to save the setting.
Please note that the units of measurement can only be changed during power-up, and the selected units will be saved for future use.
Add New Comment