User Manual Q&AAnswer
Feb 01, 2025 - 01:02 AM
To connect the Unitech RM100 UHF RFID Reader Module to a PC, please follow these steps:
1. Install the IndyTool software on your PC. You can find the installer file, IndyTool v2.6.msi, and double-click it to launch the installation wizard. Follow the prompts and designate the desired installation directory.
2. Mount the UHF RFID Module onto the interface board.
3. Connect the interface board to your PC using a micro USB cable.
4. Insert the power connector into the power inlet on the interface board and plug the power adapter into an electrical socket.
5. Insert the connector of the antenna into the antenna port of the RM100 UHF RFID Reader Module.
6. Open the IndyTool software. You can either double-click the desktop shortcut or navigate to the IndyTool installation folder and double-click IndyTool.exe.
7. Once the IndyTool application is open, click on the "Start" button to scan RFID tags using the RM100 UHF RFID Reader Module.
By following these steps, you should be able to successfully connect the Unitech RM100 UHF RFID Reader Module to your PC and start using it for RFID tag scanning. For more detailed information, please refer to the user guide provided with the product.
Add New Comment