User Manual Q&AAnswer
Feb 01, 2025 - 12:56 AM
To boot up the Thundercomm TurboX C865 Development Kit, follow these steps:
1. Carefully remove the C865 DK board from the package.
2. Connect the power adapter to the board via the DC jack (connector 15 on the Main IO Board).
3. If you need to use the adb tool, connect the board assembly to a computer via the Type-C USB 3.1 connector (connector 5 on the Main IO Board).
4. If you need the debug function, connect the board assembly to a computer via the USB 2.0 debug connector (connector 22 on the Main IO Board).
5. Press and hold the Power on button (connector 21 on the Main IO Board) for three seconds to boot up the device.
Please refer to the Thundercomm TurboX C865 Development Kit User Guide for more detailed instructions and illustrations.
Add New Comment