User Manual Q&AAnswer
Feb 01, 2025 - 12:26 AM
To connect the ZigBee XT-ZB6 3.0 and BLE5.0 Coexistence Module to your device, you will need to follow these steps:
1. Ensure that your device operates at a working voltage of 2.5V to 3.6V, as specified in the module's technical parameters.
2. Identify the appropriate pins on the module for the desired functionality. The module provides various peripheral interfaces such as UART, GPIO, PWM, I2C, ADC, and DAC. Refer to the module's interface definition table in the user manual for details on the pin functions.
3. Connect the corresponding pins on the module to the corresponding pins on your device. For example, if you want to use the UART interface, connect the UART pins on the module to the UART pins on your device.
4. Ensure that the module is powered properly. Connect the power supply to the appropriate pins on the module, keeping in mind the working voltage range mentioned earlier.
5. If you are using an external antenna, connect it to the U.F.L RF connector (IPEX V1.0) on the module. If you are using the PCB antenna, no additional connections are required.
6. Once the connections are made, you can start programming your device to communicate with the module using the appropriate communication protocol (ZigBee or BLE). Refer to the module's SDK (Software Development Kit) for guidance on programming and utilizing the module's features.
Please note that these instructions provide a general overview of the connection process. For more detailed information and specific instructions, refer to the ZigBee XT-ZB6 3.0 and BLE5.0 Coexistence Module User Manual.
Add New Comment