User Manual Q&AAnswer
Feb 01, 2025 - 12:25 AM
To connect the XD700.100S-B Piezo Actuator to the controller, please follow the installation and connection instructions provided in the user manual. Here are the steps:
1. Ensure that the installation plane is flat.
2. Connect the load to the piezo actuator, making sure that the load does not exceed the maximum load capacity of the actuator. Use a wrench to tighten the clamping surface during installation.
3. Mount the piezo actuator on the measuring platform or fix it on the measuring plane through the optical platform adapter. Use the appropriate screws for fixed installation, referring to the structural dimension drawing. Again, use a wrench to tighten the clamping surface during installation to generate torque and avoid damage to the actuator.
4. Connect the piezo actuator to the controller.
5. If you have any questions or need further assistance, please contact the manufacturer's customer service.
Please note that the manual provides additional information and precautions for the safe and proper use of the XD700.100S-B Piezo Actuator. It is important to read the manual carefully before installation and use to prevent any potential injury or damage.
Add New Comment