User Manual Q&AAnswer
Feb 01, 2025 - 12:17 AM
To connect the WVC-1600 Micro Inverter to the monitoring system, follow these steps:
1. Connect the two communication antennas on the collector (Modem) as required.
2. Place the collector in an appropriate location to ensure it can receive the Wi-Fi signal from the inverter.
3. Make sure the connected Wi-Fi network is in 2.4G communication mode.
4. Reset the collector for the first use by pressing and holding the reset button for more than 5 seconds. The indicator light will go out and light up again after 5 seconds.
5. Release the button, and the device will complete the reset.
6. Open the intelligent monitoring software "Cloud Intelligence" APP and log in to your account.
7. Click the "+" icon in the upper right corner to start adding a device.
8. When the APP changes to the QR code scanning state, scan the QR code label at the bottom of the Modem. The APP will automatically collect the body code of the Modem and jump to the Wi-Fi connection page.
9. Enter the current Wi-Fi password and click Next.
10. Connect the Modem to the power supply and quickly press the "Reset" button. The Modem will enter the network distribution state when the "Raday" indicator turns from a long on state to a fast flashing state.
11. After completing the network configuration of the Modem, return to the phone and check the "I have completed the above operations" checkbox on the initialization device operation page. Click the "start connection" button.
12. The page will jump to the signal search page, and the Modem's indicator light will become a fast flashing state. When a Wi-Fi signal is found, the indicator light will flash slowly until the network configuration is completed, and the indicator light will return to a steady state.
13. The page will then jump to the completion page. Click "Finish" to add the inverter.
14. To add multiple inverters, fill in the 8-digit code on each inverter and separate them with commas.
Please refer to the WVC-1600 Wireless Series R3 Micro Inverter User Manual for more detailed instructions and illustrations.
Add New Comment