User Manual Q&AAnswer
Jan 31, 2025 - 11:51 PM
To start the Flextool FP212G Submersible Pump, follow these steps:
1. Refer to the engine manufacturer's operation manual for correct starting procedures.
2. Do not engage the drive coupling while the motor is rotating.
3. Before engaging the flexshaft with a petrol drive unit, start the motor using the recoil starter.
4. Increase the speed to full throttle and allow it to warm up for a few minutes.
5. Stop the motor.
6. Turn the bell housing trigger 180 degrees.
7. Insert the flexshaft coupling fully into the housing of the drive unit and release the trigger.
8. Push the coupling into the housing and twist the flexible shaft until the drive dogs are fully engaged and the trigger returns to the horizontal position.
9. The motor may now be started.
Please note that these instructions are a summary and it is important to refer to the specific engine manufacturer's operation manual for detailed starting procedures.
Add New Comment