User Manual Q&AAnswer
Jan 31, 2025 - 11:50 PM
To attach the bowls to the mixer, follow these steps:
1. Turn the Speed Control xxxx to OFF and unplug the mixer.
2. Place the Bowl Lift Handle in the down position.
3. Fit the Bowl Supports over the Locating Pins on the mixer.
4. For both bowls, make sure to fit the Detent Ball on the back of the bowl into the corresponding Detent on the mixer.
5. Raise the Bowl Lift Handle up into the locked position.
Note: It is important to always have the bowl attached before turning on the mixer to avoid any accidents or injuries.
Add New Comment