User Manual Q&AAnswer
Jan 31, 2025 - 11:49 PM
To install the EATON Led DX 10011 Pictogram plate for GuideLed, follow these steps:
1. Determine the mounting location: Decide whether you want to mount the luminaire on a wall, ceiling, or pendulum.
2. Prepare the luminaire: Remove any foreign objects from the luminaire before its initial operation.
3. Wall mounting: If you choose to mount the luminaire on a wall, use the provided wall mounting set. Feed the mains cable and switching input or loop cable through the cable entries. Fix the mounting adapter to the wall using suitable screws. Connect the electrical wiring as described in chapter 4.1.
4. Ceiling mounting: If you choose to mount the luminaire on the ceiling, feed the mains cable and switching input or loop cable through the cable entry and fix the ceiling mounting adapter with suitable screws. Connect the electrical wiring as described in chapter 4.1.
5. Pendulum mounting: If you choose to mount the luminaire using pendulum tubes, feed the mains cable and switching input or loop cable through the cable entry of the ceiling mounting adapter. Fix it with suitable screws at the fixing holes. Connect the electrical wiring as described in chapter 4.1.
6. Recessed ceiling mounting: Make a ceiling cut-out according to the dimensional drawings. Introduce the cable through the recessed ceiling mounting enclosure and fix it in the cut-out using the provided claws. Connect the electrical wiring as described in chapter 4.1.
7. Set the address: Set the required address on the supply module as described in chapter 4.2 and 4.3.
8. Complete the installation: Depending on the chosen mounting method, slide the pictogram panel onto the mounting adapter, fix it with screws, and attach the canopies or cover frame. Make sure to follow the specific instructions for each mounting method.
Please refer to the EATON Led DX 10011 Pictogram plate for GuideLed User Manual for more detailed instructions and illustrations.
Add New Comment