User Manual Q&AAnswer
Jan 31, 2025 - 11:48 PM
To connect the MC-FXO-32-SC20A and MC-FXS-32-SC20B converters to your telephone system, follow these steps:
1. Use the MC-FXO-32-SC20A unit as a transmitter and connect it to your PBX analog phone lines using RJ-11 jacks.
2. Use the MC-FXS-32-SC20B unit as a receiver and connect it to your telephone sets or fax machines using RJ-11 jacks.
3. Ensure that the fiber optic link between the two units is established. The "Fiber" LED indicator should be ON to indicate a successful fiber link.
4. Connect the AC-DC5V 5A external power adapters to both units for power supply.
5. Once the units are powered on and connected, the "Phone Line" LED indicators should be ON or flashing, indicating that the units are working normally.
Please refer to the user manual for more detailed instructions and illustrations on the connection diagram.
Note: It is important to use one single-mode fiber, SC, and WDM transmission up to 20Km or one multi-mode fiber for transmission up to 2Km, depending on your specific requirements and the ordering information provided.
Add New Comment