Answer

Jan 31, 2025 - 11:40 PM
To connect the SMART SBM777-43 Interactive Whiteboard to your computer, follow these steps:
1. Ensure that your computer meets the minimum system requirements mentioned in the user guide.
2. Locate the USB cable included with the whiteboard. This cable will provide both the digital signal and power from your computer to the whiteboard.
3. Connect one end of the USB cable to the USB port on your computer.
4. Connect the other end of the USB cable to the USB port on the back of the whiteboard.
5. Once the USB cable is connected, your computer should recognize the whiteboard as a new device.
6. Install the SMART Product Drivers on your computer. These drivers enable all the features of the SMART software. You can download the drivers from the SMART website (smarttech.com/support).
7. Follow the installation instructions provided with the SMART Product Drivers to complete the installation process.
8. Once the drivers are installed, your computer should be able to communicate with the whiteboard.
9. To test the connection, open an application on your computer and touch the interactive screen with your finger or the included pen. The computer image should appear on the whiteboard's screen, and you should be able to interact with the application using touch or the pen.
Note: If you encounter any issues during the connection process, refer to the troubleshooting section in the user guide or contact SMART Support for further assistance.
Add New Comment