User Manual Q&AAnswer
Jan 31, 2025 - 11:35 PM
To install the Namron 4512737 Touch Zigbee 16A Thermostat, follow these steps:
1. Ensure that the installation is done by a qualified electrician.
2. Turn off the power supply during the installation process.
3. Remove the display unit and front cover using a small screwdriver.
4. Insert the wires into the correct terminals as shown in the wiring diagram provided in the manual. The suggested wire-stripping length is 8-10mm.
5. Secure the thermostat into the connection box by tightening the screws. Make sure it is fixed without any deformation. The suggested torque is 0.2-0.4Nm (2.0-4.1kgf.cm).
Please refer to the installation section in the Namron 4512737 Touch Zigbee 16A Thermostat Instruction Manual for more detailed instructions and diagrams.
Note: It is important to follow all safety precautions and local electrical codes when installing the thermostat. If you are unsure or uncomfortable with the installation process, it is recommended to seek assistance from a qualified electrician.
Add New Comment