User Manual Q&AAnswer
Jan 31, 2025 - 11:30 PM
The indoor display and outdoor camera are already paired in the factory, so there is no need to pair them again. However, if you are experiencing issues with monitoring or signal, you can try resetting the indoor display to factory settings. To do this, go to the main menu on the display and select "About," then choose "Reset Setting" and confirm. Enter the default password "1234" to reset the display. After resetting the indoor display, go to the main menu and select "Pair" to enter the pairing menu. Use the arrow buttons to input the default password "1234" on the indoor display, and it will enter pairing mode, showing "pairing" on the screen. Then, press the pair hole button on the outdoor camera three times quickly using a pin. The green light will illuminate, and it will enter pairing mode, showing "pairing" on the screen. Both the indoor display and outdoor camera will sound "duan" to indicate successful pairing, and the display will show "pair success." If pairing fails, it will sound "dada," and the display will show "pairing failed." In that case, you will need to repeat the above operations.
Add New Comment