User Manual Q&AAnswer
Jan 31, 2025 - 11:16 PM
To install the Keystone KT-MSLED19-2-8XX-VDIM-P Led Microstrip Fixture, please follow the instructions provided in the user manual. Here is a step-by-step guide:
1. Ensure that the power supply is turned off before starting the installation process.
2. Determine the desired location for the fixture and mark the mounting points on the surface.
3. Attach the fixture to the surface using the appropriate mounting hardware. Make sure the fixture is securely fastened.
4. Connect the fixture to the electrical supply. The input voltage for the fixture is 120-277V.
5. If you want to dim the fixture, connect a 0-10V dimming control device to the appropriate dimming wires on the fixture. The fixture supports 0-10V dimming with a minimum dimming level of 10%.
6. Once the fixture is securely mounted and connected to the power supply, turn on the power and test the functionality of the fixture.
Please note that this is a general installation guide. For detailed instructions and safety precautions, refer to the user manual provided with the product.
Add New Comment