User Manual Q&AAnswer
Jan 31, 2025 - 11:05 PM
To start the NAKAYAMA PC4600 Air Cooled Gasoline Chainsaw, follow these steps:
1. Fill the fuel and chain oil tanks and tighten the caps securely.
2. Set the switch to the "I" position.
3. Pull out the choke xxxx to the closed position.
4. While holding the saw unit securely on the ground, pull the starter rope vigorously.
5. Once the engine has ignited, pull the throttle lever slightly to return the choke xxxx to the open position and pull the starter again to start the engine.
6. Allow the engine to warm up with the throttle lever pulled slightly.
Note: When restarting immediately after stopping the engine, leave the choke xxxx at the open position.
Please refer to the NAKAYAMA PC4600 Air Cooled Gasoline Chainsaw User Manual for more detailed instructions and safety precautions.
Add New Comment