User Manual Q&AAnswer
Jan 31, 2025 - 10:59 PM
To pair the Tronsmart Air Conduction Wireless Headphones with your device, follow these steps:
1. Ensure that the headphones are in a power-off state.
2. Press and hold the power button for 3 seconds until the blue LED starts flickering. This indicates that the headphones are powering on.
3. While the headphones are in the power-on state, press and hold the power button for 5 seconds until the red LED flickers once. This indicates that the headphones are powering off.
4. Press and hold the power button for 3 seconds to enter pairing mode. The red and blue LEDs will start flickering, and you will hear a pairing reminder tone.
5. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
6. When your device discovers "Jet Plane," select it to connect.
7. Once the headphones are successfully linked to your device, the blue LED will flicker every 5 seconds, and you will hear a connected reminder tone.
Note: It is important to clear any previous pairing information if you encounter connection issues. Press and hold the power button and the volume down button for 5 seconds in shutdown mode to clear the pairing information. The red and blue LEDs will blink for 1 second spontaneously.
For more detailed instructions and information, refer to the Tronsmart Air Conduction Wireless Headphones instruction manual.
Add New Comment