User Manual Q&AAnswer
Jan 31, 2025 - 10:56 PM
To install the zcom AC-720M module, follow these steps:
1. Ground yourself by touching a piece of metal to avoid electrostatic discharge (ESD).
2. Keep the module in its antistatic-shielded bag until you are ready to install it.
3. Install the AC-720M module on the platform.
4. Tighten the xxxx to secure the module in place.
5. Connect the antenna cable to the module.
6. Power on the device after confirming the installation is okay.
Important Notes:
- Maintain a minimum distance of 20cm between the antenna and your body.
- Before installing and using the wireless module, carefully read the manual that came with the package.
- Use ONLY the bundled RF cable and antenna.
For more detailed instructions and safety guidelines, please refer to the "Hardware Installation" section of the zcom AC-720M 802.11ac Wireless LAN USB Module User Manual.
Add New Comment