User Manual Q&AAnswer
Jan 31, 2025 - 10:53 PM
, follow these steps:
1. Locate the USB charging port on the light. It is usually located on the side or bottom of the light.
2. Connect the provided USB cable to the USB charging port.
3. Plug the other end of the USB cable into a compatible USB power source, such as a computer, wall adapter, or power bank.
4. The battery indicator light on the UT11 will turn on and indicate the charging status. A green light indicates a high battery level, an orange light indicates a medium battery level, and a red light indicates a low battery level.
5. Allow the UT11 to charge until the battery indicator light turns solid green, indicating a full charge. The charging time may vary depending on the battery level and the charging source.
6. Once fully charged, disconnect the USB cable from the UT11 and the power source.
Note: It is recommended to fully charge the UT11 before initial use and to recharge it when the battery level is low to ensure optimal performance.
For more information or if you encounter any issues, you can refer to the instruction manual or contact NEXTORCH customer service through the provided email, phone number, or by contacting your local dealer/distributor.
Add New Comment