Answer

Jan 31, 2025 - 10:47 PM
To install the Apart KUBO3 T Kubo Speaker Series, follow these steps:
1. Determine the position where the bracket will be mounted on the wall or ceiling. You can choose between vertical or horizontal alignment.
2. Mark two mounting holes on the wall or ceiling and mark the mounting hole in the middle for an invisible installation of the safety cable.
3. If the bracket is to be mounted on stone or concrete, drill the mounting holes using a stone drill (6 mm). Attach the bracket using the appropriate hardware. For wood, use screws, and for other materials, use the correct fixing material. Make sure the hardware can safely support the loudspeaker's weight.
4. Install the safety cable on the wall.
5. Mount the bracket on the wall.
6. Connect the loudspeaker cables to the autoblock terminals. It is recommended to use wire ferrules when using stranded wire.
7. Connect the safety cable to the integrated safety nut.
8. Slide the loudspeaker into the K-Mount.
9. Rotate the loudspeaker and connect the autoblock connectors.
10. Tighten the fixing bolts by hand or with a screwdriver if the space between the wall and the loudspeaker is limited.
11. For the 70/100 volt versions, set the selector according to the required power rating or connection type. Make sure to set the power tapping prior to applying audio and only change the setting while the audio amplifier is shut off.
12. Finish the installation by mounting the supplied magnetic end caps.
Please refer to the instruction manual for more detailed information and illustrations on the installation process.
Add New Comment