User Manual Q&AAnswer
Jan 31, 2025 - 10:40 PM
To install the Smeg FAB10ROR5 Free-Standing Orange Fridge, please follow these steps:
1. Choose a suitable location: Ensure that the fridge is placed on a flat and stable surface. Avoid direct sunlight or heat sources that may affect its performance.
2. Leave a gap: When positioning the fridge adjacent to a wall or kitchen unit, make sure to leave a gap of 175mm on the hinged side of the product. This gap is necessary to allow the door to open fully.
3. Plug into a power source: Connect the fridge to a suitable power outlet. The voltage required is 220-240V with a frequency of 50Hz. The power supply cable length is 170cm.
4. Check the hinge position: The Smeg FAB10ROR5 has a right hinge position by default. Ensure that the hinge is on the correct side for your installation needs.
5. Adjust the shelves: The fridge compartment features one adjustable glass shelf and one fruit and vegetable drawer. You can adjust the height of the glass shelf according to your storage requirements.
6. Organize the door shelves: The inner door of the fridge has two adjustable shelves and one bottle shelf. Arrange them as per your preference to accommodate different-sized items.
7. Use the internal light: The fridge is equipped with an internal LED light, which illuminates the interior when the door is opened. This helps you easily locate items even in low light conditions.
Please refer to the Smeg FAB10ROR5 Free-Standing Orange Fridge manual for more detailed instructions and safety precautions.
Add New Comment