User Manual Q&AAnswer
Jan 31, 2025 - 10:35 PM
To charge the devices (DUT 1, 2, 3, 4, and 6), you can use the EUT 2 Charger and the provided charging cables or any 5V USB power adapter. The charging time is approximately 3-4 hours from empty to full. When charging, the status LED next to the USB connector will blink blue to indicate charging and will stay continuously blue when the charge is finished. When the status LED is red, it means the battery is almost empty (less than 10% SOC), orange indicates normal operation, and green indicates a full charge. The LED will turn off after approximately 20 seconds, and to turn it on again, you can press the button or turn the upper part of the device.
(Source: Dresden Elektronik TX Measurement DEKO Light Conbee Instructions)
Add New Comment