User Manual Q&AAnswer
Jan 31, 2025 - 10:35 PM
To adjust the Hot Start function on the GYS TIG 160 DC Lift Single Phase TIG Welder, follow these steps:
1. Press the selector button (5) briefly.
2. The "MMA" LED will start flashing and the display (1) will indicate the current Hot Start value.
3. Use the keys (4) to set the desired percentage of Hot Start (within the limit of 0 to 60%).
4. Validate the selected figure by pressing the selector button (5).
5. The "MMA" LED will remain illuminated, indicating that the Hot Start function is active.
It is recommended to use a lower Hot Start setting for thin metal sheets and a higher setting for metals that are difficult to weld (dirty or oxidized parts). Adjusting the Hot Start function can help improve the starting performance of the electrode and prevent sticking.
Please note that these instructions are based on the information provided in the GYS TIG 160 DC Lift Single Phase TIG Welder Instruction Manual. Always refer to the manual for specific instructions and safety guidelines.
Add New Comment