User Manual Q&AAnswer
Jan 31, 2025 - 10:29 PM
To assemble the JAMARA 460625 Mercedes-Benz G 350 d Push-Car, follow these steps:
1. Assembling the steering column:
- Slide the steering column from bottom to top through the hole in the body.
- Insert the bent end of the steering column into the gap at the bottom of the body.
2. Assemble the steering wheel:
- Slide the locking element onto the handlebar.
- Slide the steering wheel and secure it with the xxxx and nut.
3. Trunk assembly:
- Install the trunk on the back of the car body and fix it with 2 screws.
4. Backrest assembly:
- Insert the backrest into the designated location at the rear upper end of the car until it locks in place.
5. Push bar assembly:
- Place the push rod in the handle and xxxx the parts with two screws and secure each with a nut.
- Take out the cotter pin at the end of the tube.
- Slide the finished pushrod into the backrest and insert the cotter pin at the underside of the model.
6. Handrail assembly:
- Slide the safety brackets into the brackets on the backrest, making sure that the holes are exactly one above the other.
- Secure each bracket with a safety bolt.
- Insert the safety bar into the locking element at the front of the model, ensuring that the door will engage properly.
For visual reference, please refer to the images in the instruction manual provided with the product.
Note: It is important to read the complete instructions and safety instructions carefully before assembling and using the model.
Add New Comment