User Manual Q&AAnswer
Jan 31, 2025 - 10:04 PM
To connect the RadioLink M8N GPS SE100 to your flight controller, you will need to follow the instructions provided in the user manual. Here are the steps:
1. Locate the GPS UART interface on the GPS module. It will have multiple pins for connection.
2. Connect the corresponding wires from the GPS module to your flight controller. The color coding may vary, so refer to the manual for the specific color codes.
3. Typically, you will need to connect the VCC (power), TX (transmit), RX (receive), GND (ground), CLK (clock), and SDA (data) wires.
4. Ensure that you connect the wires correctly according to the pinout diagram provided in the manual.
5. Once the connections are made, you can power on your flight controller and the GPS module should start communicating with it.
It is important to note that the specific connection details may vary depending on your flight controller model. Therefore, it is recommended to refer to the user manual of your flight controller for more specific instructions.
Add New Comment