User Manual Q&AAnswer
Jan 31, 2025 - 10:00 PM
To connect the Actiontec API7220 11ax 2x2 Indoor Access Point to your network, follow these steps:
1. Connect one end of an Ethernet cable to the GbE WAN port on the access point.
2. Connect the other end of the Ethernet cable to your modem or router.
3. Connect one end of another Ethernet cable to the GbE LAN port on the access point.
4. Connect the other end of the Ethernet cable to a computer or another device that you want to connect to the access point.
5. Plug the included AC/DC adapter into the DC jack on the access point.
6. Plug the other end of the AC/DC adapter into a power outlet.
Once the access point is powered on and connected to your network, you should be able to access the internet and connect to the access point's wireless network using the provided SSID and password.
Add New Comment