User Manual Q&AAnswer
Jan 31, 2025 - 09:40 PM
To charge the DJI CS785U CrystalSky Wireless LCD Monitor, follow these steps:
1. Use the Inspire 2 charger or the specified charger for the CrystalSky monitor.
2. Place the battery into the standard charging hub.
3. Connect connector B of the battery charger to the charging hub.
4. Connect the battery charger to a power outlet (100-240V, 50/60Hz).
5. The Charging Hub will intelligently charge batteries in sequence according to battery power levels from high to low.
6. The buzzer will begin beeping when charging is complete.
7. Remove the battery or turn off the Buzzer Switch to stop it.
8. The Status LED blinks green when charging and turns solid green when fully charged.
Note: Do not charge the Intelligent Flight battery together with the Intelligent Battery when using the Inspire 2, Phantom 4 charger, or Inspire 2 Car Charger. The USB power supply port can be used to charge a mobile device of 5V/2A. Refer to the Charging Hub (WCH2) User Guide for more details.
Please refer to the DJI CS785U CrystalSky Wireless LCD Monitor User Guide for more detailed instructions and safety guidelines.
Add New Comment