User Manual Q&AAnswer
Jan 31, 2025 - 08:48 PM
To install the nVent Caddy 617 Pipe Roller with Steel Frame, please follow the instructions provided in the user guide. Here is a step-by-step guide:
1. Identify the location where you need to support the pipe from a substructure or structural member. Ensure that there is enough space for longitudinal movement due to expansion or contraction.
2. Make sure the frame and axle of the pipe roller are made of carbon steel, and the roll is made of cast iron.
3. Determine the appropriate finish for your installation. The options are hot-dip galvanized or electrogalvanized. Choose the finish that best suits your application.
4. Install the pipe roller in accordance with the applicable code. This ensures that the installation meets the necessary safety and regulatory requirements.
5. If you have the nVent Caddy 619 Adjustable Pipe Roller with Steel Frame, you can make vertical adjustments using the adjusting bolts on each corner. This allows you to accommodate different pipe sizes and configurations.
6. Refer to Federal Specification WW-H-171 (Type 45) and Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 44) for further guidelines and standards.
Please consult the user guide for more detailed instructions and any specific considerations for your installation.
Add New Comment