User Manual Q&AAnswer
Jan 31, 2025 - 08:26 PM
To install the NavAtlas NA82M Mirror Type Universal Command Center, follow these steps:
1. Place the rubber pad between the unit and the mounting bracket.
2. Align the bracket to the xxxx holes behind the unit.
3. Insert and tighten the 6mm screws.
4. Assemble the ring clamps and align them to the bracket, then use 6mm screws and tighten.
Note: The mounting bracket can be installed either upright or upside down depending on the application.
For more detailed instructions and illustrations, please refer to the "Installation Instructions" section on page 1 of the user guide.
Add New Comment