User Manual Q&AAnswer
Jan 31, 2025 - 08:14 PM
To install the Genexis Pulse EX600 mobile device using the Genexis EasyWiFi app, follow these steps:
1. Download the Genexis EasyWiFi app from your app store and install it on your mobile device.
2. Place your Pulse EX600 near your broadband outlet.
3. Connect a network cable between your broadband outlet and the Pulse EX600 WAN port (red port).
4. Plug the power adapter into an electrical socket and connect it to the power port at the back of the Pulse EX600.
5. Flip the ON/OFF switch at the back of the device to turn it on.
6. Wait until the Status LED stops blinking and turns solid green.
7. Open the Genexis EasyWiFi app on your mobile device.
8. Follow the on-screen instructions in the app to complete the installation process.
Note: Make sure you have a stable internet connection and follow any additional instructions provided in the Genexis EasyWiFi app for a successful installation.
For more detailed information and troubleshooting, refer to the installation guide provided with the Genexis Pulse EX600 or visit the Genexis website for additional product information and support.
Add New Comment