User Manual Q&AAnswer
Jan 31, 2025 - 10:32 AM
The installation process for the ORSKEY Dash Cam is straightforward. Here are the steps to install it in your car:
1. Mounting the Dash Cam:
- Choose a suitable location on your car's windshield to mount the dash cam. It should have a clear view of the road ahead.
- Clean the area where you plan to mount the dash cam using the included cleaning cloth.
- Remove the protective film from the adhesive side of the mount.
- Press the mount firmly against the windshield for a few seconds to ensure it sticks securely.
2. Power Connection:
- Connect the provided power cable to the dash cam's power input port.
- Route the cable along the car's interior, hiding it from view as much as possible.
- Plug the other end of the power cable into the car's cigarette lighter socket or USB port.
3. Adjusting the Camera Angle:
- The dash cam's lens can be rotated to adjust the camera angle. Gently twist it until you achieve the desired position.
4. Powering On and Setting Up:
- Once the dash cam is connected to power, it will automatically turn on and start recording.
- Use the buttons on the dash cam or the included remote control to access the settings menu.
- Follow the instructions in the user manual to configure the desired settings, such as video resolution, loop recording, and motion detection.
Please refer to the for detailed illustrations and additional information on installation, setup, and usage.
Add New Comment