User Manual Q&AAnswer
Jan 31, 2025 - 05:56 AM
To connect your SVS Prime Wireless Pro SoundBase to your TV, you have a few options depending on the available connections on your TV. Here are the steps for each connection method:
1. HDMI ARC / eARC:
- Connect an HDMI cable from the HDMI ARC or eARC output on your TV to the HDMI In (ARC / eARC) input on the SoundBase.
- Make sure to enable HDMI ARC or eARC in your TV's audio settings.
- Select the HDMI input on the SoundBase by rotating the control xxxx or using the remote control.
- Start playback on your TV, and the audio should be routed through the SoundBase.
2. Optical:
- Connect an optical cable from the optical digital output on your TV to the Optical Input on the SoundBase.
- Make sure to set the audio output on your TV to use the optical connection.
- Select the Optical input on the SoundBase by rotating the control xxxx or using the remote control.
- Start playback on your TV, and the audio should be routed through the SoundBase.
3. RCA Line In:
- Connect RCA cables from the left and right audio outputs on your TV to the Left/Right RCA Line In inputs on the SoundBase.
- Select the RCA Line In input on the SoundBase by rotating the control xxxx or using the remote control.
- Start playback on your TV, and the audio should be routed through the SoundBase.
Please note that the specific steps may vary depending on your TV model and settings. It is recommended to consult your TV's user manual for detailed instructions on audio output settings.
For further assistance or troubleshooting, you can refer to the full SVS Prime Wireless Pro SoundBase owner's manual available at www.svsound.com/prime-wireless-pro-ma... or contact SVS Sound Experts at custservice@svsound.com or (877) 626-5623.
Add New Comment