How do I measure for a betta Roller Blind? (Betta Roller Blind Measuring Instruction Guide)

Answer

manuals.plus

Jan 31, 2025 - 05:52 AM

Sure! Here are step-by-step instructions on how to measure for a betta Roller Blind:

1. Decide on the fitting style: Before measuring, determine whether you want to install the blind as a Face Fit (outside mount) or a Reveal Fit (inside mount) based on your preferences and the characteristics of your windows.

2. Measuring for a Face Fit (outside mount):
- Measure the width at the top of your window opening or architrave. It is recommended to measure from architrave to architrave or leave 50mm - 100mm on each side for better fabric coverage and privacy.
- Take three measurements: top, middle, and bottom, as the posts may be out of square. Use the smallest measurement if needed.
- Measure the drop from the inside of where the blind will be fitted to where you want the blind to finish. Take three measurements: left, middle, and right, and use the smallest measurement if needed.

3. Measuring for a Reveal Fit (inside mount):
- Measure the width at the top of your window opening from inside the window to inside the window.
- Take three measurements: top, middle, and bottom, as the window may be out of square. Use the smallest measurement if needed.
- Measure the drop from the inside of where the blind will be fitted to where you want the blind to finish. Take three measurements: left, middle, and right, and use the smallest measurement if needed.

4. Order the blind: Once you have the accurate measurements, order the blind with the width and drop dimensions you obtained. If you want to include a pelmet, refer to the provided pelmet size and pelmet return size guidelines.

Remember to take note of any obstacles that may affect the blind's operation, such as door and window handles or window mullions. Consider the pros and cons of each fitting style and choose the one that suits your needs best.

Please note that these instructions are a general guide, and it is recommended to consult with an experienced expert measurer/installer for precise measurements and installation.