User Manual Q&AAnswer
Jan 31, 2025 - 05:42 AM
Sure! Here are step-by-step instructions on how to measure for a betta Vertical Blind:
1. Decide on the installation style: Before measuring, decide whether you want to install the blind on the Face Fit/Outside Mount or Reveal/Inside Mount of the window frame. The most common fitting is Reveal Fit for a neater look, but make sure you have enough depth to allow the blind to fit and operate correctly. Use Face Fit if you want your blind to hang outside the window recess or when the opening is too shallow or the window is significantly out of square.
2. Measure the width: For a Face Fit (Outside Fit) blind, measure the width at the top of your opening and where you will be fitting the blind. It is recommended to measure from architrave to architrave or if you have square set windows, add 50mm - 100mm on each side for better fabric coverage and more privacy. Take three measurements: top, middle, and bottom, as the posts may be out of square. Use the smallest measurement in some circumstances.
3. Measure the drop: For a Face Fit (Outside Fit) blind, measure the drop at the top of your opening to the bottom of where you want the blind to finish. If you are not stopping the blind at the architrave, measure down past the window for a personal choice. A rule of thumb is to measure 50mm - 100mm past the sill. Take three measurements: left, middle, and right, and use the smallest measurement if necessary.
4. Measure for a Reveal Fit (Inside Fit) blind: Measure the width from inside of the window to inside the window at the top of your opening. Take three measurements: top, middle, and bottom, and use the smallest measurement if necessary. Measure the drop from the inside of where the blind is being fitted to where you want the blind to finish. Take three measurements: left, middle, and right, and use the smallest measurement if necessary.
5. Order the blind: When ordering the blind, provide the measurements in millimeters (mm) and indicate the width measurement first, then the drop measurement. If you want deductions to be made for the blind, order it as "Open Size." If you want no deductions to be made, order it as "Make Size."
6. Consider pelmets: If you want to order pelmets, the pelmet width will depend on the blade size and the installation style. Refer to the provided pelmet size and pelmet return size guidelines for the appropriate measurements.
7. Measuring guide for bay windows and blinds butting in corners: If you have bay windows or blinds butting in corners, refer to the specific measuring guides provided in the manual for detailed instructions on how to measure for those situations.
Remember, it is essential to measure accurately for the blinds to fit correctly. If you have any concerns or specific questions, it is recommended to consult with an experienced expert measurer/installer.
Add New Comment