User Manual Q&AAnswer
Jan 31, 2025 - 05:28 AM
To connect the VOLCORA V-HHBS-A1B Wireless Handheld Barcode Scanner with Base to your device, follow these steps:
1. Make sure the scanner battery is charged before use.
2. Determine the wireless mode you want to use: 2.4G Wireless Mode, Bluetooth HID Mode, or Bluetooth SPP/BLE Mode.
3. For 2.4G Wireless Mode:
- Scan the "2.4G Wireless Mode" barcode to pair the scanner with the dongle.
- Scan the "Quick Pair" barcode to enter pairing mode.
- Plug in the dongle to your host device within 60 seconds.
- If paired successfully, you will hear a beep and the indicator light will stay on.
4. For Bluetooth HID Mode:
- Scan the "Quick Pair" barcode to enter pairing mode.
- On your host device, search for and select the Bluetooth device "Barcode Scanner-HID".
- If paired successfully, you will hear a beep and the indicator light will flash.
5. For Bluetooth SPP/BLE Mode:
- Scan the "Quick Pair" barcode to enter pairing mode.
- On your host device, search for and select the Bluetooth device "Barcode Scanner SPP" or "Barcode Scanner BLE".
- If paired successfully, you will hear a beep and the indicator light will stay on.
If you encounter any issues during the connection process, please refer to the troubleshooting section in the user manual or contact the vendor for further assistance.
Add New Comment