User Manual Q&AAnswer
Jan 31, 2025 - 05:20 AM
To fill the clean water tank of the Bissell CROSSWAVE All In One Multi Surface Cleaner, follow these steps:
1. Pull the clean water tank up to remove it from the machine.
2. Unscrew the cap from the bottom of the tank.
3. Choose the appropriate Bissell formula for your cleaning needs.
4. The clean water tank has fill lines for both Large Area and Small Area cleaning. Choose the fill lines that best suit the size of the area you want to clean.
5. Use warm tap water (up to 140°F/60°C) and add the appropriate amount of Bissell formula to the tank.
6. xxxx the cap back on the tank.
7. Align the clean water tank with the grooves on the back of the machine and slide it until it clicks into place.
Note: It is important to only use Bissell CrossWave formulas in the machine, as other formulas or household cleaners may damage the machine. Additionally, do not use the hard floor formula on area rugs or carpet.
For more information and visual instructions, you can refer to the Bissell CROSSWAVE All In One Multi Surface Cleaner User Manual or visit support.BISSELL.com for assembly videos.
Add New Comment