User Manual Q&AAnswer
Jan 31, 2025 - 05:19 AM
To connect the Niceboy ORBIS Water sensor to the Niceboy ION app, please follow these steps:
1. Make sure you have the Niceboy ION app downloaded and the Niceboy ION ORBIS Bridge installed.
2. Insert the battery (CR2032 type) into the sensor unit.
3. Hold the reset button (hidden under the water drop icon) for 5 seconds until the indicator light starts flashing rapidly.
4. Open the Niceboy ION app and tap on the "Home" tab. Then open the Niceboy ION ORBIS Bridge.
5. Click on "Zigbee devices list" and then on "Add device" followed by "Add new devices". The app will start searching for nearby devices.
6. Once the ORBIS Water sensor is found, it will appear on the screen. Click on the device and add it to your app.
7. Alternatively, you can also open the Niceboy ION app and tap on the "+" icon in the top right corner to enter the "Add Device" page. Select "Sensors" and then click on "Water sensor". Choose the Zigbee gateway (Niceboy ION ORBIS Bridge) and confirm that you have inserted the batteries, reset the device, and that the indicator light is blinking rapidly (as mentioned in step 3).
8. The app will start searching for a new device. Once the ORBIS Water sensor is found, simply add it to the app.
9. The new device will be visible in both the Niceboy ION ORBIS Bridge and the "Home" page of the app.
Please note that these instructions are based on the information provided in the Niceboy ORBIS Water sensor user manual.
Add New Comment