User Manual Q&AAnswer
Jan 31, 2025 - 05:18 AM
To charge the PIT PH20-2.0 Battery Pack, follow these steps:
1. Ensure that the battery pack is partially charged before using it for the first time. If it is not partially charged, fully charge the battery in the charger before using it with your power tool.
2. Connect the battery pack to the charger. The charger should be compatible with the PIT PH20-2.0 Battery Pack.
3. Plug the charger into a power outlet.
4. The charger will indicate the charging status of the battery pack. It may have LED lights or other indicators to show the progress of the charging process.
5. Allow the battery pack to charge fully. The charging time may vary depending on the charger and the current charge level of the battery pack.
6. Once the battery pack is fully charged, disconnect it from the charger.
Note: It is important to charge the battery pack within the recommended ambient temperature range of 0°C to +45°C. Charging outside of this temperature range can increase the risk of damage to the battery and pose a fire hazard.
For more detailed information on charging and other safety instructions, please refer to the PIT PH20-2.0 Battery Pack User Manual.
Add New Comment