User Manual Q&AAnswer
Jan 31, 2025 - 05:16 AM
To connect the COI UNO5 projector to your devices, follow these steps:
1. HDMI Connection:
a. Use an HDMI cable to connect the HDMI output port of your device (such as a laptop, DVD player, or gaming console) to the HDMI input port on the projector.
b. Make sure the projector is turned on and set to the HDMI input source.
c. Your device's screen should now be projected onto the projector screen.
2. VGA Connection:
a. Use a VGA cable to connect the VGA output port of your device to the VGA input port on the projector.
b. Make sure the projector is turned on and set to the VGA input source.
c. Your device's screen should now be projected onto the projector screen.
3. USB Connection:
a. Use a USB cable to connect your device (such as a USB flash drive or external hard drive) to the USB port on the projector.
b. Use the projector's remote control to navigate and select the USB input source.
c. You can now access and display the files stored on your USB device through the projector.
4. Audio Connection:
a. If you want to play audio through the projector's built-in speakers, connect an audio cable (such as a 3.5mm AUX cable) from the audio output port of your device to the audio input port on the projector.
b. Make sure the projector is turned on and the audio input source is selected.
c. The audio from your device should now be played through the projector's speakers.
Note: The specific ports and connections may vary depending on the model and version of the COI UNO5 projector. Refer to the user manual for detailed instructions and illustrations specific to your projector model.
Add New Comment