User Manual Q&AAnswer
Jan 31, 2025 - 05:07 AM
To connect the light kit to the battery box, please follow these steps:
1. Locate the battery box included in the kit.
2. Identify the connector cable provided with the light kit. It should have a plug on one end and multiple wires on the other end.
3. Insert the plug of the connector cable into the corresponding port on the battery box. Make sure it is securely connected.
4. Take the other end of the connector cable with multiple wires and identify the wire labeled "positive" or "+". This wire is usually red.
5. Connect the positive wire to the positive terminal of the battery box. The positive terminal is usually marked with a "+" symbol.
6. Identify the wire labeled "negative" or "-". This wire is usually black.
7. Connect the negative wire to the negative terminal of the battery box. The negative terminal is usually marked with a "-" symbol.
8. Ensure that all connections are secure and properly aligned.
9. Once connected, you can turn on the battery box to activate the lights in your Solomon R. Guggenheim Museum model.
Please note that if you prefer to use another power source, make sure the maximum voltage does not exceed 6V to avoid damaging the lights or the components of the light kit.
Add New Comment