User Manual Q&AAnswer
Jan 31, 2025 - 04:58 AM
To synchronize or pair the transmitter and receiver of the ThermoPro TP07S Digital Wireless Meat Thermometer, follow these steps:
1. Insert the stainless steel probes into the corresponding plugs in the transmitter.
2. Turn on the transmitter by pressing and holding the ON/OFF/ºF/ºC button for 2 seconds. The transmitter will show the current temperatures on its LCD display.
3. Turn on the receiver by pressing and holding the ON/OFF/°F/°C button for 2 seconds.
4. Press and hold the Mode button on the receiver for 2-3 seconds to enter the synchronization mode. The display will show "---" and flash.
5. Wait for a moment until the temperature reading shows on the receiver display. This indicates that the synchronization/pairing is complete.
Note: The synchronization between the transmitter and receiver should not be lost even if you replace the batteries.
If you have any further questions or issues, please refer to the ThermoPro TP07S Digital Wireless Meat Thermometer user manual or contact ThermoPro customer service for assistance.
Add New Comment